The 10 Best 2 2kw Water Cooled Spindle In 2022

The 10 Best 2 2kw Water Cooled Spindle In 2022

Looking for the best 2 2kw water cooled spindle? Well then, look no further as your search landed you in the right place. Thank us later for saving your time scouring thousands of articles online to look for the best product.

There is absolutely no reason to fret over which product to choose from the wide array of products. Our team has carefully curated this article weighing all the pros and cons. So what are you waiting for? Check it out!

10 Best 2 2kw water cooled spindle in Reviews

1. RATTMMOTOR 220V Water Cooled Spindle Motor 2.2KW CNC 80mm Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 220V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine

Features :

  • 【Spindle Motor】Power: 2.2KW ; Voltage: 220V; Current: 8A; Diameter:80mm; Collet type: ER20 Collet
  • Notice: (1)The spindle speed can’t be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle motor kit is mainly applied to Lathes, Mills, Car Hoists, Pumps and Conveyors, etc.
  • Runout off: less than 0.02mm; Accuracy: 0.003–0.005mm; Speed:0-24000rpm; Frequency: 0-400Hz
  • 【 Inverter】Power: 2.2KW; Input Voltage: 220V(+/-15%); Output Voltage:208-240VAC; Input Frequency: 48-63 Hz; Output Frequency: 0-400 Hz; Input Phase: 1phase; Output Phase: 3 phase.
  • 【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.

Additional Info :

Color 220V

2. RATTMMOTOR CNC Spindle Motor Kit 110V 2.2KW Water Cooled Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 110V Single to 3 Phase Inverter+80W Water Pump+ER20 Collet+80mm Mount Clamp for CNC Router Machine

Features :

  • 【Package Include】: ①1 x 2.2KW Water Cooled Spindle Motor ②1 x 2.2KW VFD ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥1 x ER20 Wrench ⑦14 x ER20 Collet(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
  • 【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003–0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
  • 【2.2KW VFD】①Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
  • ②Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What’s more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
  • 【How to Connect Spindle Motor and VFD】The spindle motor’s aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter’s port U, V, W respectively. Number 4 is the ground wire, no wiring is required.

3. RATTMMOTOR CNC Spindle Motor Kit, 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

Features :

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥1 x ER20 Wrench ⑦14 x ER20 Collet(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003–0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input:1 or 3 phase 220V 0-50Hz/60Hz. Output:3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ~40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. There has many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
  • 【How to Connect Spindle Motor and VFD】The spindle motor’s aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter’s port U, V, W. Number 4 is the ground wire, no wiring is required.

Additional Info :

Item Dimensions
Height 31.49606296
Width 31.49606296
Length 83.464566844
Weight 10.21

4. Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet HUANYANG CNC VFD Motor Factory Direct Sales

Features :

  • The item is Water Cooled 220V-2.2KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet)
  • NOTE:Need to be equipped with 220v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 110v voltage at 50hz or 60hz, it will damage the spindle.
  • operating speed:8000rpm-24000rpm
  • Lubricated with grease, which is resistant to 200 degrees high temperature.
  • Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding.

Additional Info :

Color 220v-2.2kw-3 bearings
Item Dimensions
Weight 12.21

5. RATTMMOTOR CNC Spindle Motor Kit 220V 2.2KW Water Cooled Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 220V Single to 3 Phase Inverter+80W Water Pump+ER20 Collet+80mm Mount Clamp for CNC Router Machine

Features :

  • 【Package Include】: ①1 x 2.2KW Water Cooled Spindle Motor ②1 x 2.2KW VFD ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥1 x ER20 Wrench ⑦14 x ER20 Collet(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003–0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
  • 【2.2KW VFD】①Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase, Current: 11A. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
  • ②Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What’s more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
  • 【How to Connect Spindle Motor and VFD】The spindle motor’s aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter’s port U, V, W respectively. Number 4 is the ground wire, no wiring is required.

6. 110V 2.2kw vfd Spindle Package:110V 2.2KW VFD+110V 2.2KW Φ80mm ER20 Water Cooled Spindle Motor+110V Water Pump+80mm Clamp +5m Water Pipe

Features :

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor(pin1=U,pin2=V,pin3=W,pin4=ground)
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to operate, please contact the seller

Additional Info :

Color 110v-2.2kw

7. 2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Engraving Milling Machine

Features :

  • ♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm; Frequency:400Hz; Voltage:110V; Accuracy: 0.003–0.005; Collet size: ER20; Bearings: 4 bearings; Net Weight: 5.2kg;Lubrication:Grease;Current:8.5A;Size:80x200mm
  • ♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%) ; Output Voltage 100V-120VAC ; Input Frequency: 48-63Hz ; Output Frequency: 0-400Hz ; Input Phase: Single phase ; Output Phase: Three phase; Output Current: 20A
  • ♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum
  • ♞【80W Water Pump+6M Pipe】Pump length:3.2m; Voltage:105-120VAC with US plug; Flow:3000L/H; Size:150x80x140mm
  • ♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm

Additional Info :

Item Dimensions
Weight 9.8

8. VFD CNC Spindle Motor Kits:220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Φ80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)

Features :

  • 【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor(pin1=U,pin2=V,pin3=W,pin4=ground)
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product
  • 【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
  • 【Warranty】1 Year discount replace (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller

Additional Info :

Color 220v-2.2kw

9. Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

Features :

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you

Additional Info :

Item Dimensions
Weight 12.65

10. Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

Features :

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you

Additional Info :

Color 220v-2.2kw-4 bearings
Item Dimensions
Weight 11.88

Why Go for Online Stores?

Whenever you look up product reviews, you might notice an uncanny similarity. All the online stores bag the first places. Have you ever thought about why people bank on online stores to this extent?

In this digital era, people always look out for easier options. So purchasing any products like 2 2kw water cooled spindle is only a matter of time for online shopping. You can easily purchase products anywhere and anytime and cancel them as well.

Expose yourself to various brands for the same product via online stores. Even more, price comparisons are what buyers enjoy on these platforms. With just a few clicks, you can navigate through the product pages and spend your money wisely.

Just in the palm of your hands, you can grab some amazing deals at low prices. Who would not love this?

Factors You Need to Consider When Buying 2 2kw water cooled spindle from Online Stores

Are you on the hunt for 2 2kw water cooled spindle? Well, purchasing online needs some contemplation. To help your cover all the important questions, we have prepared a list.

Just go through the question list. Feel free to do your own research while purchasing the 2 2kw water cooled spindle. Below are some examples you might deem right to ask:

  • Is the 2 2kw water cooled spindle really worth the money?
  • What specific advantages does it offer?
  • Does the 2 2kw water cooled spindle you’re picking have any innovative features?
  • What are some of the best features of the 2 2kw water cooled spindle?
  • Does your 2 2kw water cooled spindle come with a warranty?
  • Does it have any con that might prove to be detrimental in the long run?
  • Where will you find enough information about 2 2kw water cooled spindle?
  • Where can you find some of the best 2 2kw water cooled spindles?

Probably, you have come up with way more questions than there are on the list. Do not deprive your curious mind of the answers. Research, research, and research, until you locate the answers to the factors.

Other Benefits of Buying Products From Online Stores

The list of pros for purchasing online can be unending. We havefound you multiple reasons to purchase a 2 2kw water cooled spindle from Online Store. So let’s dive in to see some of the best advantages:

Best Prices

Online purchase has been renowned for offering items at the best possible prices. As such places have networks with many dealers and manufacturers, sellers offer the best deals. Moreover, there are no intermediaries, which lessens the additional costs.

Comparability

You can easily compare the same product on many websites at once, just by sitting at home. Then, by seeing the ratings, you can evaluate which product to go for by yourself. Thus, you can gain access to better quality than traditional shopping.

Reliability

As online stores portray customer reviews,  purchasing from them gives a reliability boost. If faced with any defect, there is a scope for you to change.

Some stores have excellent customer service, pushing you to buy from there.

Huge Array

Online stores have a large consumer base. Every day, millions of people shop online. Moreover, after the pandemic, more and more people are inclined towards online shopping.

What’s in it for you?

You get to choose the best product from the pool of various choices. If one model does not meet your criteria, you always have the flexibility to jump to some other models.

Convenience

Who does not love convenience? Having everything as per your wish is something to die for. Buying a product from an online store is such. You do not have to worry about the time, the place, or the crowd.

Everything happens when you want it and how you want it.

How to Choose Your 2 2kw water cooled spindle

If you want to purchase products like the 2 2kw water cooled spindle, you need to follow a buying guide. Some features need to tick your boxes before buying. Let’s take a look at them:

Price

If you want to grab the best deal, the price is what you would check first. Then, compare the price that various sellers offer and choose the best suitable one.

Brand

When you buy the 2 2kw water cooled spindle, the brand is the second thing that you might consider. Learn to differentiate among brands to arrive at the right decision.

Warranty

The warranty of the 2 2kw water cooled spindle must be taken into account as well. No one would like to spend dollars on a product that barely lasts a month!

Functionality

Check out your 2 2kw water cooled spindle’s functionality when you buy it. An easy way to do that would be to check the specs.

Remember, the more vast the specs, the greater your product’s functionality.

Size

You must know the size/dimensions of your 2 2kw water cooled spindle. Any wrong fit will make the product useless. Thus, it is recommended to learn about the product size beforehand.

Color

Suppose you end up buying a 2 2kw water cooled spindle whose color does not meet your taste. It would be throwing your money down the drain.

Hence, you should note what color preferences you have. Then, later, check if the online store features them or not.

Old Customer Reviews

Most smart purchasers would do this. Verifying the authenticity of the product is indeed a smart move.

When you scroll down, you will come across product reviews on the website. Checking them out will help figure out which brand to go for.

Final Words

That’s a wrap for the product 2 2kw water cooled spindle. We hope this buying guide facilitates your buying journey. So follow it to grab the best deals out there.

Also, do a self-analysis to know more about the best 2 2kw water cooled spindle. Then, try it out and let us know if our comprehensive guide came to use or not!

Have a good buy!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top