The 10 Best 3d Printer Firmware In 2022

The 10 Best 3d Printer Firmware In 2022

Looking for the best 3d printer firmware? Well then, look no further as your search landed you in the right place. Thank us later for saving your time scouring thousands of articles online to look for the best product.

There is absolutely no reason to fret over which product to choose from the wide array of products. Our team has carefully curated this article weighing all the pros and cons. So what are you waiting for? Check it out!

10 Best 3d printer firmware in Reviews

1. BIGTREETECH Upgraded SKR Mini E3 V3.0 Silent Board 32bit Mainboard Integrated with TMC2209 Stepper Driver Support Marlin/Klipper Firmware Compatible with Ender V2 Ender 3 Pro/5 3D Printers

Features :

  • 🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
  • 🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
  • 🌟【Superior Heat Dissipation Performance】New Upgraded SKR MINI E3 V3.0 main board is equipped with a large Aluminum heat sink of stepper motor driver instead of pieces small heat sink, this design is able to increase the heat dissipation performance of the motherboard by 20% which greatly strengthen the heat dissipation capacity of the driver totally.
  • 🌟【Firmware Update】Compatible with Marlin and Klipper firmware. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard,copy and save it to SD card , firmware must bed reserved, then re-plug the SD card and wait to 10s. The n firmware has been successfully updated. Note: Our control board come without SD card.
  • 🌟【TMC2209 Drivers】SKR MINI E3 V3.0 mainboard adopts ultra silent TMC2209 stepper motor driver, it generates lower heat and it has a large-area cooling position to lower the temperature when driver working. Meanwhile, it adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.

2. BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)

Features :

  • 🐙【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • 🐙【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 🐙【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
  • 🐙【TMC2209 Driver Features】The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
  • 🐙【TMC2209 Driver Mode】TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.

Additional Info :

3. Creality ,3D Printer LCD Screen,Upgrade Animal Texture Effect Touch Control 5″ HD Display for Ender3/ 3 V2/ 3 pro/Ender 5/ CR-10 and All FDM 3D Printers with Marlin Firmware (3D PAD)

Features :

  • Skin effects : Creality 3D Pad come with texture effect , one click on print 3D cute pets without any change of slicing modeles , close to reality
  • Instant date caching : Just in case TF card or U disk ffline accidently, our 3D Printer HD Display provide Instant date caching to support the machine keep print for 20 to 40 more seconds
  • Texture mode is our new exploration of 3D printing, mainly to help customers without drawing capabilities. If users can use 3D software to increase skin effects, you can try to use texture mode. You may have unexpected surprises.
  • Premium touch control :High sensitivity capaciteve multi touch 3D Pad , somoothness on your fingerips, supports 11+ Languages
  • To prevent errors in select print files and show a more intuitive print progress, our 3D pad provide gcode file preview ,custom slicing software for you to see the printing models easily

Additional Info :

Color 3D PAD

4. Creality 5 Inches 3D Pad HD Display Screen for Ender3/Ender3 V2/ Ender5/ CR-10 and All FDM 3D Printers with Marlin Firmware

Features :

  • Widely Compatible for All FDM 3D Printers with Marlin firmware
  • Animal Texture Effect with More Fun
  • Premium Touch Control, Supports 11+ Languages
  • Built-in Holder Model Library from Creality Clouds
  • Power Loss Resume and Filament Run-out Detection

Additional Info :

5. FYSETC 3D Printer Vorn 2.4 Upgrade Smart Board STM32-Mini12864 Module Supports Klippe Firmware Compatible with Voro 2.4 MINI12864 LCD Display Screen

Features :

  • This is a dedicated board to drive a FYSETC Mini 12864 Display on Voro2.4 3D printes. It’s intended to run the Klippe firmware.
  • Help to reduce the number of wires to connect LCD display to your voro. No ribbon cables are required. Simple and Convenient.
  • Easy to use, plug this directly onto the back of smart screen and then use a single micro USB cable to the Raspberry Pi.
  • Firmware Compilation, please refer to “Voro-Hardware/STM32_Mini12864/” on github.
  • When you receive the module, make sure to weld the reset button and BOOTO jumper head. You may not need the SWD interface.Do not skip BOOTO pin in normal operation mode. It is only used when the board is placed in DFU mode to flash new firmware.

Additional Info :

6. Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

Features :

  • 【TITAN DIRECT DRIVE】✔️The direct extruder for Creality CR 10 v3 is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints.
  • 【WARRANTY】✔️ Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!
  • 【EXTRA LARGE】✔️Printer CR10 V3 comes with one of the largest build spaces available. At 12x12x15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【GLASS BED】✔️he reliable and flat glass bed can make the model easier to adhere to when printing, and easy to remove after cooling. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time.
  • 【24V/350W MEANWELL POWER SUPPLY】✔️Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100; BL-Touch Frame Reserved.
  • 【OPEN SOURCE】✔️ In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【HIGH QUALITY】✔️All aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic “Triangle-Slot” wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.

Additional Info :

Item Dimensions
Height 23.58263
Width 22.0472
Length 19.685
Weight 31.96702799

7. BIGTREETECH SKR 3 EZ New Silent Mainboard Motherboard Support Marlin &Klipper Firmware Compatible with EZ2209, EZ5160, TMC5160, TMC2209, TMC2208 Driver for 3D Printer DIY Control Board

Features :

  • ☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
  • ☆【Distinct High Motor Voltage】 Motor voltage of SKR 3 varies from DC 12V to 24V, while SKR 3 EZ varies from 12V to 48V.Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What’s more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
  • ☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
  • ☆【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What’s more, it’s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
  • ☆【About Firmware】SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name “firmware.bin”, copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to “FIRMWARE.CUR” then update successfully. Note: Our control board come without SD card.

Additional Info :

8. WEEDO X40V2 3D Printer Independent Dual Extruder, Firmware Open Source, Auto-Leveling, 4.3” Touch Screen, Support PVA TPU ABS PLA Nylon, 11.8″x11.8″x15.7″

Features :

  • 【Independent Dual Extruder】WEEDO X40V2 designed with independent dual extruders on the linear rail, with the dual extrusion, duplication and mirror mode printing, it’s super-efficient if you run a 3d printing farm.
  • 【Auto-leveling 3d printer】WEEDO IDEX X40V2 is designed with proximity sensor to improve the overall printing reliability. We have also added essential quality of life features such as print resume after power loss and auto power off to save energy.
  • 【User Friendly UI System】WEEDO X40V2 adopts a 4.3-inch full-color touch screen.The user-friendly UI is equipped with a multi-language interface. Can’t remember what you named your .gcode? Don’t worry! The graphical print interface displays a preview picture and details for each model, making it easy to identify your sliced file from Wiibuilder.
  • 【Build in Camera 】WEEDO X40V2 equipped with ESP32 Wi-Fi chip and a built-in camera module that allows you to check your printer in the local area network. You can also start prints over the network with CURA and our Wiibuilder slicer integrations.When X40 connect to our control App: PoloPrint Pro,you’ll be able to receive notifications from your social account when prints are complete.
  • 【Help Button & Warranty】The UI includes a context based Help icon, which is convenient for beginners to quickly get guidance on how to use the interface based on where they are on the menu. One-year warranty for the printer and a 3-month warranty for the extruder. Lifetime technical support, any problems please feel free to contact our support team, when you have problem with it, we will respond to you 7/24.

Additional Info :

Color Black
Item Dimensions
Height 25.984251942
Width 24.409448794
Length 22.047244072
Weight 29.101018584

9. V3 Extension Board, CNC Shield Expansion Board with 4pcs A4988 Stepper Motor Driver Heat Sink for Engraver 3D Printer DC 12V to 36V

Features :

  • NOTE:Use removable A4988 or DRV8825 compatible stepping driver
  • CAN BE USED FOR:The extension board can be used for engraving machine or 3D printer driver
  • COMPATIBLE WITH GRBL 0.8:Compatible with GRBL 0.8. Open-source firmware operated, converting G code command into stepping signal
  • PWM SPINDLE AND DIRECTION PIN:PWM spindle and direction pin, 4 shaft support (X, Y, Z, A – you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • COMPACT DESIGN:Compact design, stepping motor can connect 4 pin connectors or be soldered

Additional Info :

Item Dimensions
Height 0
Width 0
Length 0

10. DC12V – 24V Max 40A MOSFET High Current Load MOS Tube Heating Controller Heated Bed Power Module Hot Bed Power Expansion Board Compatible for Anet CR-10 Ender 3 Prusa 3D Printer

Features :

  • External high current mosfet module is a solution for power a large heatbed without blow up the control board of your 3D printer.
  • Working voltage:DC 12-24V ;Working current:typical 30A up to 40A with coolingfan; Control pin compatible with both aux pin and bed mosfet output
  • It can be controlled by any aux pins from control board so you can save a mosfet output to doing other things(need to change the heater pin in the firmware)
  • Please mind the anode and cathode of the connectors; Please insure the wire of your circuits is big enough for handle such amonut of current; Do not tin the ends of the wire; Preferably,use bootlace ferrules on the end of the wires; Please make sure the screws of the mosfet module terminals are tighten up to minimize the contact resistance otherwise the terminals will melt under lager current.
  • Each module will doing a load test before delivery; Superior performance of MOSFET(60V/230A R(ds)2.2mΩ); Large heat sink 57A terminals; Can handle up to 40A with cooling fan

Additional Info :

Item Dimensions
Weight 0.330693393

Why Go for Online Stores?

Whenever you look up product reviews, you might notice an uncanny similarity. All the online stores bag the first places. Have you ever thought about why people bank on online stores to this extent?

In this digital era, people always look out for easier options. So purchasing any products like 3d printer firmware is only a matter of time for online shopping. You can easily purchase products anywhere and anytime and cancel them as well.

Expose yourself to various brands for the same product via online stores. Even more, price comparisons are what buyers enjoy on these platforms. With just a few clicks, you can navigate through the product pages and spend your money wisely.

Just in the palm of your hands, you can grab some amazing deals at low prices. Who would not love this?

Factors You Need to Consider When Buying 3d printer firmware from Online Stores

Are you on the hunt for 3d printer firmware? Well, purchasing online needs some contemplation. To help your cover all the important questions, we have prepared a list.

Just go through the question list. Feel free to do your own research while purchasing the 3d printer firmware. Below are some examples you might deem right to ask:

  • Is the 3d printer firmware really worth the money?
  • What specific advantages does it offer?
  • Does the 3d printer firmware you’re picking have any innovative features?
  • What are some of the best features of the 3d printer firmware?
  • Does your 3d printer firmware come with a warranty?
  • Does it have any con that might prove to be detrimental in the long run?
  • Where will you find enough information about 3d printer firmware?
  • Where can you find some of the best 3d printer firmwares?

Probably, you have come up with way more questions than there are on the list. Do not deprive your curious mind of the answers. Research, research, and research, until you locate the answers to the factors.

Other Benefits of Buying Products From Online Stores

The list of pros for purchasing online can be unending. We havefound you multiple reasons to purchase a 3d printer firmware from Online Store. So let’s dive in to see some of the best advantages:

Best Prices

Online purchase has been renowned for offering items at the best possible prices. As such places have networks with many dealers and manufacturers, sellers offer the best deals. Moreover, there are no intermediaries, which lessens the additional costs.

Comparability

You can easily compare the same product on many websites at once, just by sitting at home. Then, by seeing the ratings, you can evaluate which product to go for by yourself. Thus, you can gain access to better quality than traditional shopping.

Reliability

As online stores portray customer reviews,  purchasing from them gives a reliability boost. If faced with any defect, there is a scope for you to change.

Some stores have excellent customer service, pushing you to buy from there.

Huge Array

Online stores have a large consumer base. Every day, millions of people shop online. Moreover, after the pandemic, more and more people are inclined towards online shopping.

What’s in it for you?

You get to choose the best product from the pool of various choices. If one model does not meet your criteria, you always have the flexibility to jump to some other models.

Convenience

Who does not love convenience? Having everything as per your wish is something to die for. Buying a product from an online store is such. You do not have to worry about the time, the place, or the crowd.

Everything happens when you want it and how you want it.

How to Choose Your 3d printer firmware

If you want to purchase products like the 3d printer firmware, you need to follow a buying guide. Some features need to tick your boxes before buying. Let’s take a look at them:

Price

If you want to grab the best deal, the price is what you would check first. Then, compare the price that various sellers offer and choose the best suitable one.

Brand

When you buy the 3d printer firmware, the brand is the second thing that you might consider. Learn to differentiate among brands to arrive at the right decision.

Warranty

The warranty of the 3d printer firmware must be taken into account as well. No one would like to spend dollars on a product that barely lasts a month!

Functionality

Check out your 3d printer firmware’s functionality when you buy it. An easy way to do that would be to check the specs.

Remember, the more vast the specs, the greater your product’s functionality.

Size

You must know the size/dimensions of your 3d printer firmware. Any wrong fit will make the product useless. Thus, it is recommended to learn about the product size beforehand.

Color

Suppose you end up buying a 3d printer firmware whose color does not meet your taste. It would be throwing your money down the drain.

Hence, you should note what color preferences you have. Then, later, check if the online store features them or not.

Old Customer Reviews

Most smart purchasers would do this. Verifying the authenticity of the product is indeed a smart move.

When you scroll down, you will come across product reviews on the website. Checking them out will help figure out which brand to go for.

Final Words

That’s a wrap for the product 3d printer firmware. We hope this buying guide facilitates your buying journey. So follow it to grab the best deals out there.

Also, do a self-analysis to know more about the best 3d printer firmware. Then, try it out and let us know if our comprehensive guide came to use or not!

Have a good buy!

Leave a Comment

Your email address will not be published.

Scroll to Top