How To Buy Best Subwoofer Amplifier Module In 2022

How To Buy Best Subwoofer Amplifier Module In 2022

Is your company in need of the most reliable and efficient best subwoofer amplifier module in the market? Your good luck led you to the ideal situation, so congratulations! You are in the best possible place. By eliminating the need to read through dozens of reviews, we are saving you time and stress.

Many customers find it difficult to decide which subwoofer amplifier module product to buy. The dilemma is brought about by the many types of subwoofer amplifier modules in the market.  This comprehensive guide will provide you with a clear understanding of how you may choose the most suitable subwoofer amplifier modules available in the market.

10 Best subwoofer amplifier module Reviews & Buying Guide

1. 320W Power Amplifier Board with Subwoofer 2.0 Channel 160W×2, 15V-36V Audio Power Amplifier Module with Treble and Bass Control,Black

Features :

  • 【TDA7498E HIFI CHIP】The TDA7498E Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, Wide Voltage Input DC: 15-36V,This power amplifier board uses a TDA7498E high-fidelity maximum output power up to 160W*2
  • 【TREBLE & BASS CONTROL】If you are tired of an amplifier with only one volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of this power amplifier board, you can make the sound more layered and make the bass more shocking.
  • 【HIGH COMPATIBILITY】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-1602T BT power amplifier board.
  • 【PROTECTION FUNCTION】ZK-1602T BT power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
  • 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer

Additional Info :

Color Black
Item Dimensions
Height 1.1
Width 3.14
Length 5.22

2. TDA7498E Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel 160W×2+220W, 15V-36V Audio Power Amplifier Module with Treble and Bass Control,Black

Features :

  • 【TDA7498E HIFI CHIP】The TDA7498E Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, Wide Voltage Input DC: 15-36V,This power amplifier board uses two TDA7498E high-fidelity maximum output power up to 160W*2+220W.
  • 【TREBLE & BASS CONTROL】If you are tired of an amplifier with only one volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of the ZK-HT21 power amplifier board, you can make the sound more layered and make the bass more shocking.
  • 【HIGH COMPATIBILITY】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-HT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product.
  • 【PROTECTION FUNCTION】ZK-HT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
  • 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer

Additional Info :

Item Dimensions
Height 1.1
Width 4.72
Length 5.71
Weight 0.72091159674

3. Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel 50W×2+100W, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio and Store Home Theater

Features :

  • 【Bluetooth & 3.5mm AUX】 The ZK-MT21 power amplifier board uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface. No matter what kind of input method, you can always find a method that suits you.
  • 【Treble and bass adjustment】If you are tired of power amplifiers with only a single volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of ZK-MT21, you can make the sound more layered and make the bass more shocking.
  • 【High compatibility】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product.
  • 【Protection function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
  • 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer

Additional Info :

Item Dimensions
Height 10.32
Width 42.48
Length 44.4
Weight 0.2866009406

4. Scosche LOC2SL Line Output Converter Adjustable Amplifier Add On Module for Car Stereo, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob, Black

Features :

  • Speaker to RCA Converter – Converts car stereo output speaker wire to RCA connectors. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Delivering premium performance without noise, static, or buzzing
  • Easy Installation – Add an amplifier to nearly any stock stereo with this line out converter. Simply tap into the car audio speaker wire with snap adapters. No need to remove the car stereo. Each converter includes easy to follow instructions to simplify the installation process
  • Subwoofer – This DIY speaker kit is a convenient speaker wire to subwoofer adapter. The RCA line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car
  • RCA Converter – Speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance. Includes signal sensing 12V remote turn-on output
  • External Controller – Includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. This remote bass knob lets you control the level of sound with convenience. No reason to pull over and manually adjust the amplifier
  • Buy with Confidence – Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty

Additional Info :

Item Dimensions
Height 13.25
Width 6.63
Length 2.13
Weight 0.4
Release Date 2017-08-14T00:00:01Z

5. Bluetooth Amplifier Board 2.1 2X50W+100W 12V-24V Audio Power Amplifier Module Bass and Treble Control for Store Home Theater Speakers with Antenna

Features :

  • [2-in-1] High quality power amplifier board. With AUX and Blue tooth two audio input methods, 2-in-1. 5.0 Bluetooth version, the transmission efficiency is higher, the transmission distance is farther
  • [High Performance] Blue tooth audio amplifier module 2.1 channel, Max output power 2X50W+100W. With antenna and antenna base, the signal is better, the efficiency is high, and the anti-interference ability is strong
  • [Protection Mechanism] With short-circuit protection as well as overcurrent, overheating, and anti reverse connection protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
  • [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don’t have a DC head adapter or battery, it can be easily wired
  • [Application] With bass, treble, subwoofer frequency and volume control, easy to adjust volume, enjoy the music tone what you want. Widely used in store solicitation, home theater, square speakers, etc

Additional Info :

Color Black 2
Item Dimensions
Weight 0.2866009406

6. Fosi Audio ZK-TB21 Bluetooth 5.0 Stereo Audio Receiver Amplifier Board 2.1Channel Mini Wireless Digital AUX Amp Module Bass and Treble Control for Home Passive Speakers Subwoofer TPA3116D2 50Wx2+100W

Features :

  • CHIP: TPA3116D2 (with AM anti-interference function), 2.1 CH stereo output power 50Watt * 2+100Watt, working voltage range DC12-24V, for 4-8Ω, 50Watt-300Watt passive speakers.
  • Treble & Bass and Subwoofer Controls: With subwoofer volume controls, L and R channels Treble & Bass independently controllable. Built-in low-pass filter for subwoofer with sub-frequency control, small simple compact design but practical and powerful.
  • Bluetooth and AUX inputs: almost compatible with all home audio devices such as smartphones, iPhone, iPad, MP3, PC, CD players, etc. Enjoy acoustic surround audio with the speaker.
  • Ensure Safety: This Bluetooth amplifier board has a bottom plate and a top plate, support reverse polarity protection, over-voltage and under-voltage protection, overheat protection, short circuit protection.
  • FRIENDLY CUSTOMER SERVICE: 18-month warranty and lifetime technical support. If you have any questions, please contact us at any time.

Additional Info :

Item Dimensions
Height 1
Width 3
Length 4

7. Power Amplifier Board, 2.1 Channel Subwoofer, 300W High Power Volume Potentiometer Module, Channels 2 x 100W, Power Amplifier Module, Output Impedance 4-16 Ω

Features :

  • The circuit board designed is reasonable, beautiful, and cost‑effective, very suitable for DIY entry
  • Use high#8209;quality five#8209;ring 1% metal film resistors, larger filter capacitors and other electronic parts
  • There are 6 power amplifier tubes, 4 for left and right channels, and the other 2 are connected to the for BTL circuit for subwoofer use
  • The maximum output power is 2 x 100W for left and right channels, 1 x 120W for subwoofer
  • With small size, easy to carry and store, convenient to use and with good performance

Additional Info :

Item Dimensions
Height 0
Width 0
Length 0

8. TPA3116D2 100W Mono Amplifier Board Subwoofer Amplifier Board Module with NE5532 OPAMP, Mono High Power Subwoofer Audio Stereo AMP Digital Power

Features :

  • PCB Size: 78 * 60 mm (length * width); Power Range: 8-25V; Power Port: standard 5.5mm power jack
  • Quality power amplifier chip, DC single power supply 8-25V working voltage, 50W (left channel) and 50W (right channel), two of channel output.
  • Can use switching power supply, laptop switching power supply, battery or car power supply, etc.
  • Adopt NE5532 front-facing OPAMP to buffer, better than normal amplifier.
  • TPA3116D2 chip; Maximum output power: 100W high power; efficiency up to 90 percent. 100W mono subwoofer, outstanding effect.

Additional Info :

Color default
Item Dimensions
Height 0
Width 0
Length 0

9. Bluetooth Power Amplifier Board Stereo – HiFi 2.1 Channel 2X220W+350W Bluetooth 5.1 Audio Amplifier Board 12-38V Digital Power Amplifier Module Subwoofer Control with AUX/Bluetooth/USB Flash Drive

Features :

  • 【HI-FI & Stereo】High quality 2.1 channel 220W+220W+350W Bluetooth 5.1 power amplifier board. With AUX, Bluetooth, U disk, USB sound card a variety of audio input methods. With two output modes of active and passive speakers, you can enjoy the music you want anytime, anywhere
  • [New upgrade] The Bluetooth 5.1 power amplifier board supports APP control, and you can modify the Bluetooth name and password settings. The 5.1 Bluetooth version has settings such as adjustable sound volume, turn on/off sound, and timed shutdown. Comes with 10 natural sleep songs, up to 1023 sound combinations. Not only can you display the playlist of the USB flash drive, but you can also shake the phone to change songs or use the dial/mode button to switch songs
  • 【TPA3251D2 power amplifier chip】The power amplifier board uses 2 TPA3251D2 chips from Texas Instruments. It is a high-performance class D power amplifier, which has class D efficiency and can bring true high-end sound quality. The device features an advanced integrated feedback design and proprietary high-speed gate driver error correction. This technology enables the device to maintain ultra-low distortion across the entire audio frequency band while delivering high-definition sound quality
  • 【Super Compatibility】5.1 Bluetooth version, higher transmission efficiency, more stable, and longer transmission distance. In open spaces, the wireless range is up to 15 meters (49 feet). Can be widely used in various devices such as tablet computers, PCs, TVs, smartphones, notebook computers, etc
  • 【Safety Protection】The amplifier board has short circuit, overcurrent, overheating and anti-static protection to prevent complete failure. When overloaded, the device reports a fault condition to the processor to protect itself from damage

10. Bluetooth Subwoofer Audio Amplifier Board 50W+50W+100W with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 Stereo AMP Board for DIY Speakers, Password Free (ZK-TB21)

Features :

  • ▶【Subwoofer Audio Amplifier Board】 50W+50W+100W Bluetooth 5.0 wireless connection, Bluetooth+AUX audio input, 2.1 channel stereo output, just a little sound distortion. Note: When using AUX mode, please confirm that the Bluetooth connection of this module has been disconnected.
  • ▶【Treble and Bass Adjustment】 This digital Amp board with independent treble and bass adjustment buttons,you can directly adjust the treble and bass through the module, without using the player or speaker.
  • ▶【Perfect Sound Quality Experience】 The audio power subwoofer amplifier module with powerful chip, AM interference suppression function, shielding power inductance, low noise front stage operational amplifier, let you enjoy a more perfect sound quality experience.
  • ▶【With Protective Function】 This Bluetooth Amp module is designed with over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection, with case to protective it.
  • ▶【Easy Installation and Use】 The illustration of each interface is printed on the protective plate, making it easy to install and use even without instructions. Small size: 4.72in*3.94in*0.7in, easy to carry.

Additional Info :

Color Black 50W*2+100W

Here Are Some Tips For Choosing subwoofer amplifier module

Are you stressed out by finding the perfect subwoofer amplifier module? When considering the purchase of subwoofer amplifier module in general, have you ever felt uncertain about what model to select?

It’s sometimes enough to know that you’re not alone. subwoofer amplifier module is often difficult to find for many people. Our aim is to help you find it!

This page is obviously regarding Cheap subwoofer amplifier module Reviews which is why you’ve come here. You’ll find a lot of information available online, so research a few options before committing to anything.

Many sources can provide you with information about products- buying guides, reviews, word-of-mouth recommendations, online forums, independent product reviews found throughout the internet, and even YouTube channels. Only thorough research can help you find the right product.

That’s right? Aren’t doing that sometimes difficult? In order to prevent you from worrying, we have put together a list of the top subwoofer amplifier module products on the market, for your benefit.

Who was involved in compiling this list? What motivated us to create this buying guide?

We first gathered product information from reliable sources using the algorithms we had created.

Both Artificial Intelligence and large amounts of data volumes were used to validate all collected information.

Based on these quality/price ratios, the artificial intelligence then selected the most excellent product on the market!

The products are not selected at random. Several factors are taken into account when assembling the list. Below are a few examples:

 What our Brand is Worth:

The consequences of buying an unreliable brand because it is cheap are serious. Unreliable products are more likely to occur when you buy a cheap brand. While well-known brands give more attention to maintaining their reputations, other brands do not.

Brands like subwoofer amplifier module stand out from the competition due to their unique characteristics. As a result, we hope that you will find something on our list that you will like.

This Feature Includes:

It’s not necessary to have hundreds of features. The features that really matter are considered when choosing the top subwoofer amplifier module.

Detailed Specifications:

When you have numbers at your disposal, you can always make quantitative measurements of quality. It is our company’s mission to find products that exceed standards, while maintaining the right balance of subwoofer amplifier module.

Reviews from Customers:

You won’t be accused of wrongdoing by customers who used the subwoofer amplifier module before you, will you? If you receive better ratings, you will have a large number of satisfied customers.

Reviews from Customers:

The reviews from real customers provide reliable and authentic information about subwoofer amplifier module.

Ranking of Sellers:

Don’t you think that’s fascinating? Offering a good product is not enough, you also have to offer a popular, growing one. It is possible to achieve both goals.

A growing user base indicates that the product is a success. Considering the rapid growth of the number of sales, the manufacturers should be able to increase their quality and service after the sale.

The Value for Money is:

One of the sayings goes, “you get what you pay for.”. Buying something for the lowest price is almost never a good idea. Therefore, buying an expensive product with no real value isn’t a good choice at all. The key to evaluating the value of your subwoofer amplifier module is to evaluate what you’re getting for your money.

Longevity:

It is closely related to durability to be dependable. A durable and robust item like subwoofer amplifier module will serve you well for years to come.

Accessibility:

New products are often introduced to replace old products. They usually have new features or have undergone some modification.

Does the manufacturer no longer support supposedly good products like subwoofer amplifier module? Our goal is to showcase products from a select few, if not more, trustworthy sellers.

Ratings Below Zero:

We consider that as well! In our list of top rated subwoofer amplifier module products, we remove products that received mostly negative ratings.

Frequently Asked Questions

#1. Is this the type of subwoofer amplifier module I should choose?

Due to the differences in size between subwoofer amplifier module, knowing what will fit comfortably on to use it is important. A good subwoofer amplifier module company will provide you with support of the highest quality. Still, you may find that higher standards aren’t necessary.

#2. Can I get a subwoofer amplifier module for a reasonable price?

Lifelong companionship is typical for subwoofer amplifier module. When you fast open your lid, spending more money will reward you with increased speed, a better view, and better quality of the product. Again, the average price of a new subwoofer amplifier module is between $$ and $$$. Okay, so some luxury options are not available.

A Word of Finality

These were the criteria that we used to choose our best subwoofer amplifier module. Are these the only criteria to consider? Not at all! We constantly update our website to give you the most timely and relevant information.

Our final filter relates to reader satisfaction, since this is the factor we place at the top of our list. My sincere appreciation goes out to you! If you find any of the information or terms mentioned here incorrect, outdated, irrelevant, or otherwise inappropriate, please let us know. Our list will be updated frequently based on your reasonable suggestions, and we welcome your input.

Leave a Comment

Your email address will not be published.

Scroll to Top